k3b si blocca all'avvio

[Zalex]

ciao a tutti,
dopo vari disperati tentativi di far funzionare k3b(tuttora non riesco a compilarlo), ho scoperto installando un altro front-end(xcdroast) che il problema e' forse dell'hw.
mi spiego meglio:
quando avvio, k3b,xcdroast( o quello che e') viene fatta la scansione dei devices. bene a quel punto la cpu va al max e il processo si blocca(kill non ha nessun effetto), il pc rallenta e non mi resta che riavviare.

qualcuna ha idea di come posso risolvere?

premetto che all'avvio di linux faccio l'append di hdc e hdd=ide-scsi e ho caricato il modulo ide-scsi.


grazie

[GhePeU]

il modulo ide-scsi serve solo per i kernel 2.4, nel 2.6 non è più mantenuto e probabilmente non funziona

[Zalex]

il modulo ide-scsi serve solo per i kernel 2.4, nel 2.6 non è più mantenuto e probabilmente non funziona

infatti ho il kernel 2.4

[Zalex]

se do cdrecord -scan bus ecco il risultato

root@antstud:~# cdrecord -scanbus
Cdrecord-Clone 2.01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling
Linux sg driver version: 3.1.25
Using libscg version 'schily-0.8'.
scsibus0:
cdrecord: Warning: controller returns wrong size for CD capabilities page.
0,0,0 0) ' ATAPI ' '50X CDROM ' '1.10' Removable CD-ROM
0,1,0 1) 'HL-DT-ST' 'CD-RW GCE-8525B ' '1.01' Removable CD-ROM
0,2,0 2) *
0,3,0 3) *
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *
root@antstud:~# xcdroast

quel warning mi puzza....che dite?

[andy caps]

difficile da capire il problema

controlla se ide-scsi è inserito come modulo e prova a caricarlo
modprobe ide-scsi
poi dai un
dmesg | grep hd
e incolla cosa risponde

mettendo un kernel 2.6 in aggiunta avresti meno problemi probabilmente ed il sistema ne gudagnerebbe molto

tra le guide c'è anche quella di pierluigi per il kernel 2.6 su slack
con quello non devi fare l'append

[Zalex]

root@antstud:~# dmesg | grep hd
Kernel command line: BOOT_IMAGE=Linux ro root=303 hdc=ide-scsi hdd=ide-scsi
ide_setup: hdc=ide-scsi
ide_setup: hdd=ide-scsi
ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:DMA, hdd:DMA
hdb: C/H/S=1024/16/255 from BIOS ignored
hda: MAXTOR 6L040J2, ATA DISK drive
hdb: Maxtor 6Y060L0, ATA DISK drive
hdc: ATAPI 50X CDROM, ATAPI CD/DVD-ROM drive
hdd: HL-DT-ST GCE-8525B, ATAPI CD/DVD-ROM drive
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 78177792 sectors (40027 MB) w/1818KiB Cache, CHS=4866/255/63, UDMA(33)
hdb: attached ide-disk driver.
hdb: host protected area => 1
hdb: 120103200 sectors (61493 MB) w/2048KiB Cache, CHS=119150/16/63, UDMA(33)
hda: hda1 hda2 < hda5 hda6 hda7 hda8 > hda3 hda4
hdb: hdb1 < hdb5 > hdb2 hdb3 hdb4
hdc: attached ide-scsi driver.
hdd: attached ide-scsi driver.
root@antstud:~#

------------------------

se do un lsmod ide-scsi compare nella lista dei moduli

Module Size Used by Not tainted
snd-pcm-oss 36704 0 (unused)
snd-mixer-oss 12152 0 [snd-pcm-oss]
uhci 24284 0 (unused)
usbcore 58860 1 [uhci]
snd-cs4281 10016 0
gameport 1420 0 [snd-cs4281]
snd-opl3-lib 5860 0 [snd-cs4281]
snd-hwdep 4352 0 [snd-opl3-lib]
snd-rawmidi 12320 0 [snd-cs4281]
snd-seq-device 3812 0 [snd-opl3-lib snd-rawmidi]
snd-ac97-codec 52472 0 [snd-cs4281]
snd-pcm 54504 0 [snd-pcm-oss snd-cs4281 snd-ac97-codec]
snd-timer 13412 0 [snd-opl3-lib snd-pcm]
snd 31268 0 [snd-pcm-oss snd-mixer-oss snd-cs4281 snd-opl3-lib snd-hwdep snd-rawmidi snd-seq-device snd-ac97-codec snd-pcm snd-timer]
snd-page-alloc 4712 0 [snd-mixer-oss snd-hwdep snd-rawmidi snd-seq-device snd-pcm snd-timer snd]
soundcore 3396 6 [snd]
tulip 39200 1
crc32 2880 0 [tulip]
pcmcia_core 39172 0
ide-scsi 9392 0
agpgart 45092 0 (unused)

[andy caps]

prova ad avviare k3b poi guarda cosa dice

tail /var/log/messages


prova a scollegare provvisoriamente il cdrom e ritenta

[Zalex]

prova a scollegare provvisoriamente il cdrom e ritenta

SENZA CDROM FUNZIONA!!

pero all'avvio mi da qualche errore :

root@antstud:~# k3b
k3b: (K3bPluginFactory) creating K3bPluginFactory.
k3b: (K3bPluginFactory) creating K3bPluginFactory.
k3b: (K3bPluginFactory) creating K3bPluginFactory.
k3b: (K3bPluginFactory) creating K3bPluginFactory.
k3b: (K3bPluginFactory) creating K3bPluginFactory.
k3b: (K3bPluginFactory) creating K3bPluginFactory.
k3b: (K3bPluginFactory) creating K3bPluginFactory.
k3b: (K3bExternalBinManager) Cdrecord 2.1 features: gracetime, overburn, cdtext, clone, tao, cuefile, suidroot, plain-atapi, hacked-atapi
k3b: (K3bExternalBinManager) 2 1 -1 seems to be cdrecord version >= 1.11a02, using burnfree instead of burnproof
k3b: (K3bExternalBinManager) seems to be cdrecord version >= 1.11a31, support for Just Link via burnfree driveroption
k3b: (K3bExternalBinManager) Cdrecord 2.1 features: gracetime, overburn, cdtext, clone, tao, cuefile, suidroot, plain-atapi, hacked-atapi
k3b: (K3bExternalBinManager) 2 1 -1 seems to be cdrecord version >= 1.11a02, using burnfree instead of burnproof
k3b: (K3bExternalBinManager) seems to be cdrecord version >= 1.11a31, support for Just Link via burnfree driveroption
k3b: /dev/sr0 resolved to /dev/sr0
k3b: /dev/sr0 is block device (0)
k3b: /dev/sr0 seems to be cdrom
k3b: (K3bCdDevice::DeviceManager) /dev/sr0 bus: 0, id: 0, lun: 0
k3b: (K3bCdDevice) /dev/sr0: init()
k3b: (K3bCdDevice) /dev/sr0: GET_CONFIGURATION length: 184.
k3b: (K3bCdDevice) /dev/sr0 unknown profile: 2
k3b: (K3bCdDevice) /dev/sr0 feature: Core
k3b: (K3bCdDevice) /dev/sr0 feature: Morphing
k3b: (K3bCdDevice) /dev/sr0 feature: Removable Medium
k3b: (K3bCdDevice) /dev/sr0 feature: Random Readable
k3b: (K3bCdDevice) /dev/sr0 feature: Multi-Read
k3b: (K3bCdDevice) /dev/sr0 feature: CD Read
k3b: (K3bCdDevice) /dev/sr0 feature: Random Writable
k3b: (K3bCdDevice) /dev/sr0 feature: Incremental Streaming Writable
k3b: (K3bCdDevice) /dev/sr0 feature: Formattable
k3b: (K3bCdDevice) /dev/sr0 feature: Defect Management
k3b: (K3bCdDevice) /dev/sr0 feature: Restricted Overwrite
k3b: (K3bCdDevice) /dev/sr0 feature: CD-RW CAV Write
k3b: (K3bCdDevice) /dev/sr0 feature: MRW
k3b: (K3bCdDevice) /dev/sr0 feature: CD Track At Once
k3b: (K3bCdDevice) /dev/sr0 feature: CD Mastering
k3b: (K3bCdDevice) /dev/sr0 feature: Power Management
k3b: (K3bCdDevice) /dev/sr0: unknown feature: 257
k3b: (K3bCdDevice) /dev/sr0 feature: CD Audio analog play
k3b: (K3bCdDevice) /dev/sr0 feature: Microcode Upgrade
k3b: (K3bCdDevice) /dev/sr0 feature: Timeout
k3b: (K3bCdDevice) /dev/sr0 feature: Read Time Streaming
k3b: (K3bCdDevice::CdDevice) /dev/sr0: dataLen: 60
k3b: (K3bDevice::Device) Error: could not open device /dev/sr0for writing
k3b: (K3bDevice::Device) Error: could not open device /dev/sr0for writing
k3b: (K3bDevice::Device) Error: could not open device /dev/sr0for writing
k3b: (K3bDevice::Device) Error: could not open device /dev/sr0for writing
k3b: (K3bDevice::Device) Error: could not open device /dev/sr0for writing
k3b: (K3bDevice::Device) /dev/sr0: Number of supported write speeds via 2A: -1
k3b: (K3bCdDevice::ScsiCommand) failed: fd: 11
k3b: command: GET PERFORMANCE (ac)
k3b: errorcode: 70
k3b: sense key: NOT READY (2)
k3b: asc: 3a
k3b: ascq: 1
k3b: (K3bCdDevice::CdDevice) /dev/sr0: GET PERFORMANCE length det failed.
k3b: (K3bDeviceManager) setting current write speed of device /dev/sr0 to 9172
k3b: /dev/scd0 resolved to /dev/scd0
k3b: /dev/scd0 is block device (0)
k3b: /dev/scd0 seems to be cdrom
k3b: (K3bCdDevice::DeviceManager) /dev/scd0 bus: 0, id: 0, lun: 0
k3b: (K3bDeviceManager) dev /dev/scd0 already found
k3b: (K3bDeviceManager) Link: /dev/cdrom -> /dev/sr0
k3b: (K3bDevice::DeviceManager) SCANNING FOR GENERIC DEVICES.
k3b: (K3bDevice::Device) Error: could not open device /dev/sg1for reading
k3b: could not open device /dev/sg1 (No such device or address)
k3b: (K3bDevice::Device) Error: could not open device /dev/sg2for reading
k3b: could not open device /dev/sg2 (No such device or address)
k3b: (K3bDevice::Device) Error: could not open device /dev/sg3for reading
k3b: could not open device /dev/sg3 (No such device or address)
k3b: (K3bDevice::Device) Error: could not open device /dev/sg4for reading
k3b: could not open device /dev/sg4 (No such device or address)
k3b: (K3bDevice::Device) Error: could not open device /dev/sg5for reading
k3b: could not open device /dev/sg5 (No such device or address)
k3b: (K3bDevice::Device) Error: could not open device /dev/sg6for reading
k3b: could not open device /dev/sg6 (No such device or address)
k3b: (K3bDevice::Device) Error: could not open device /dev/sg7for reading
k3b: could not open device /dev/sg7 (No such device or address)
k3b: (K3bDevice::Device) Error: could not open device /dev/sg8for reading
k3b: could not open device /dev/sg8 (No such device or address)
k3b: (K3bDevice::Device) Error: could not open device /dev/sg9for reading
k3b: could not open device /dev/sg9 (No such device or address)
k3b: (K3bDevice::Device) Error: could not open device /dev/sg10for reading
k3b: could not open device /dev/sg10 (No such device or address)
k3b: (K3bDevice::Device) Error: could not open device /dev/sg11for reading
k3b: could not open device /dev/sg11 (No such device or address)
k3b: (K3bDevice::Device) Error: could not open device /dev/sg12for reading
k3b: could not open device /dev/sg12 (No such device or address)
k3b: (K3bDevice::Device) Error: could not open device /dev/sg13for reading
k3b: could not open device /dev/sg13 (No such device or address)
k3b: (K3bDevice::Device) Error: could not open device /dev/sg14for reading
k3b: could not open device /dev/sg14 (No such device or address)
k3b: (K3bDevice::Device) Error: could not open device /dev/sg15for reading
k3b: could not open device /dev/sg15 (No such device or address)
k3b: (K3bDeviceManager) scanning fstab: /dev/hda4
k3b: (K3bDeviceManager) scanning fstab: /dev/hda3
k3b: (K3bDeviceManager) scanning fstab: /dev/hdb2
k3b: (K3bDeviceManager) scanning fstab: /dev/cdrom
k3b: (K3bDeviceManager) found device for /dev/cdrom: /dev/scd0
k3b: (K3bDeviceManager) scanning fstab: /dev/cdrw
k3b: (K3bDevice::Device) Error: could not open device /dev/cdrwfor reading
k3b: could not open device /dev/cdrw (No such device)
k3b: (K3bDeviceManager) scanning fstab: /dev/fd0
k3b: (K3bDeviceManager) scanning fstab: devpts
k3b: Could not resolve devpts
k3b: (K3bDevice::Device) Error: could not open device devptsfor reading
k3b: could not open device devpts (No such file or directory)
k3b: (K3bDeviceManager) scanning fstab: proc
k3b: Could not resolve proc
k3b: (K3bDevice::Device) Error: could not open device procfor reading
k3b: could not open device proc (No such file or directory)
k3b: /dev/sr0 resolved to /dev/sr0
k3b: /dev/sr0 is block device (0)
k3b: /dev/sr0 seems to be cdrom
k3b: (K3bDeviceManager) dev /dev/sr0 already found
k3b: (K3bDeviceManager) found config entry for devicetype: HL-DT-ST CD-RW GCE-8525B
k3b: (K3bDeviceManager) scanning fstab: /dev/hda4
k3b: (K3bDeviceManager) scanning fstab: /dev/hda3
k3b: (K3bDeviceManager) scanning fstab: /dev/hdb2
k3b: (K3bDeviceManager) scanning fstab: /dev/cdrom
k3b: (K3bDeviceManager) found device for /dev/cdrom: /dev/scd0
k3b: (K3bDeviceManager) scanning fstab: /dev/cdrw
k3b: (K3bDevice::Device) Error: could not open device /dev/cdrwfor reading
k3b: could not open device /dev/cdrw (No such device)
k3b: (K3bDeviceManager) scanning fstab: /dev/fd0
k3b: (K3bDeviceManager) scanning fstab: devpts
k3b: Could not resolve devpts
k3b: (K3bDevice::Device) Error: could not open device devptsfor reading
k3b: could not open device devpts (No such file or directory)
k3b: (K3bDeviceManager) scanning fstab: proc
k3b: Could not resolve proc
k3b: (K3bDevice::Device) Error: could not open device procfor reading
k3b: could not open device proc (No such file or directory)
k3b: Devices:
k3b: ------------------------------
k3b: Blockdevice: /dev/sr0
k3b: Vendor: HL-DT-ST
k3b: Description: CD-RW GCE-8525B
k3b: Version: 1.01
k3b: MountDevice: /dev/cdrom
k3b: Mountpoint: /mnt/cdrom
k3b: Write speed: 9172
k3b: Profiles: CD-ROM; CD-R; CD-RW
k3b: Devicetype: CD-R; CD-RW; CD-ROM
k3b: Writing modes: SAO; TAO; RAW; SAO/R16; RAW/R96P; RAW/R96R
k3b: Reader aliases: /dev/sr0, /dev/scd0, /dev/cdrom
k3b: ------------------------------
k3b: WARNING: KGenericFactory: instance requested but no instance name or about data passed to the constructor!
k3b: (K3b::cutToWidth) not able to cut text to 1!
k3b: (K3bCore) System problems:
k3b: - none -
k3b: ERROR: (K3bSongManager) Can't open file /root/.kde/share/apps/k3b/songlist.xml
k3b: (K3bPluginFactory) deleting K3bPluginFactory.
k3b: (K3bPluginFactory) deleting K3bPluginFactory.
k3b: (K3bPluginFactory) deleting K3bPluginFactory.
k3b: (K3bPluginFactory) deleting K3bPluginFactory.
k3b: (K3bPluginFactory) deleting K3bPluginFactory.
k3b: (K3bPluginFactory) deleting K3bPluginFactory.
k3b: (K3bPluginFactory) deleting K3bPluginFactory.
root@antstud:~#

grazie intanto

[andy caps]

probabilmente fa un po di pasticci con apic che assegna irq errati
puoi provare ad aggiungere noapic nolapic tra le opzioni nell'append (tra le virgolette dopo ide-scsi)

altrimenti la cosa migliore sarebbe compilare il kernel 2.6 magari l'ultimo stabile
se mi incolli un lspci + il tipo di processore posso provare a farti un .config da fargli caricare poi con la guida in alto non è difficilissimo

potrebbe essere anche il settaggio dei ponticelli sui cdrom
a volte se settati su CS (cable select ) possono crare problemi e si dovrebbero mettere master e slave
ma se in genere e vanno è raro che sia quello

[Zalex]

potrebbe essere anche il settaggio dei ponticelli sui cdrom

no, sono settati uno a master(cdrom) e l'altro a slave(cdrw)

probabilmente fa un po di pasticci con apic che assegna irq errati puoi provare ad aggiungere noapic nolapic tra le opzioni nell'append (tra le virgolette dopo ide-scsi)

altrimenti la cosa migliore sarebbe compilare il kernel 2.6 magari l'ultimo stabile
se mi incolli un lspci + il tipo di processore posso provare a farti un .config da fargli caricare poi con la guida in alto non è difficilissimo

ora sono incasinato, appena mi libero un po c provo.

grazie 1000

ah, ma dove la trovo la guida di pierluigi?