Pagina 1 di 3 1 2 3 ultimoultimo
Visualizzazione dei risultati da 1 a 10 su 21
  1. #1

    Slackware e problemi da niubbo

    Ciao a tutti,

    quando, come questa volta, dopo numerose letture e ricerche non trovo la soluzione torno da voi...

    Eccovi i miei 3 problemi di oggi:

    1- l'audio non funziona! Credo (ma non ne sono certo) sia dovuto alla scheda audio Realtek AC97 che ricordo anche la mandrake l'anno scorso non mi riconosceva. Come si risolve?

    2- Ho scaricato OpenOffice, l'ho messo nella cartella /home/utente l'ho scompattato, a questo punto mi trovo ad avere una cartella e un file che credo sia quello di installazione. Ho provato con pkgtool e anche da riga di comando ad avviare l'installazione ma non ci riesco. Come devo fare?

    3- con swaret ho provato ad installare kde, non mi da nessun messaggio di errore e sembra aver installato tutto ma poi? come faccio a passare ad usare kde? (Domanda a monte è meglio kde o xfce? cioè cosa cambia tra kde e xfce? solo la veste grafica?


    Lo so sono domande banali e forse trite e ritrite, io ce la metto tutta a leggermi i vari how to e forum, ma purtroppo il tempo che posso dedicare è poco e scalpito per avere a disposizione almeno l'essenziale x abbandonare winzozz.


    Un grazie a tutti
    Beppe '77

    ... l'unica cosa che so è quella di non sapere.

  2. #2
    Utente di HTML.it L'avatar di zaltar
    Registrato dal
    Nov 2001
    Messaggi
    796
    1) Non tutte le schede Realtek AC97 funzionano alla grande, quella che ho io per esempio non mi permette di usare il microfono e ancora nessuno è riuscito a spiegarmi come ovviare all'inconveniente.

    2) OpenOffice è un programma particolare, non funziona a pacchetti, è dotato di un proprio installer che dev'essere lanciato da root usando un apposito comando (./oo-setup o roba del genere, per sapere cosa scrivere leggere un readme sicuramente presente oppure un file chiamato INSTALL).

    3) I vari window manager non differiscono solo per veste grafica, ma anche per sfruttamento delle risorse hardware: quelli più spartani sono più veloci di quelli fastosi, tuttavia se si possiede una bestia di computer questo divario si riduce al punto da essere trascurabile.
    Ti dico subito che KDE è più facile per i niubbi di XFCE, però XFCE è più veloce e meno dispersivo, benchè la sua configurazione sia più complessa (KDE diciamo che è facile, XFCE medio, XFWM2 difficile).
    KDE va installato fuori da qualsiasi window manager, ossia nella modalità corrispondente al DOS: nessun desktop avviato.
    Alcuni pacchetti vanno installati prima di altri a volte, per qualsiasi approfondimento al riguardo consiglio Slacky.it, il portale leader della distro in Italia.

    Note tecniche:
    -> Per evitare che parta graficamente Slackware, da root modificare il file /etc/inittab settando il parametro init a 3 anzichè a 4 (è una delle prime cose che si trovano nel file, balza all'occhio).
    -> Per lanciare il window manager predefinito da modalità non grafica si usa "startx".
    -> Per selezionare da modalità non grafica il window manager che vuoi come predefinito si usa "xwmconfig".
    -> XFCE non accende il tastierino numerico in maniera predefinita, ma si trovano programmini ultraleggeri che lo fanno come XNumLock o qualcosa di simile.

  3. #3
    bisognerebbe sapere che scheda audio è ac è troppo generico e comune a tutte le schede integrate

    sapendo che chipset monta la scheda magari si risale alla scheda audio
    controlla dmesg o scanpci installa comunque con swaret i files di alsa che spesso risolvono da soli

    per openoffice conviene installare quello sistemato per slack http://www.linuxpackages.net/pkg_details.php?id=6005
    o aggiungere linuxpackages.net a swaret ( anche se poi troppe repository creano bisticci )

    se hai installato anche kdm mettendo come run level 4 al posto di 2 o 3 in /etc/inittab parte il login grafico dal quale puoi scegliere il desktop che preferisci avviare

    kde è un desktop piu completo anche se piu pesante facilmente configurabile e con molti programmi utili
    anche xfce comunque va benissimo
    provali poi giudica tu

  4. #4
    Queste due sono le righe di risposta al comando dmesg

    eth0: RealTek RTL8139 at 0xe0b02000, 00:0d:61:a6:cc:13, IRQ 11
    eth0: Identified 8139 chip type 'RTL-8101'

    mentre il comando scanpci mi da un messaggio di errore se lo eseguo come utente e comando non trovato se provo ad eseguirlo da root

    con swaret ho installato i pacchetti alsa (swaret --install alsa) ma ancora l'audio non funziona.

    che devo fare?
    Beppe '77

    ... l'unica cosa che so è quella di non sapere.

  5. #5
    Utente di HTML.it L'avatar di zaltar
    Registrato dal
    Nov 2001
    Messaggi
    796
    Ehm... quella è la scheda di rete veramente.

  6. #6
    dai un swaret --search alsa

    dovresti installare almeno alsa-utils e alsa-base

    di dmesg devi guardare i chipset audio

    che chip ha la tua scheda madre ?
    intel nforce via ???


    incolla qui il dmesg

  7. #7
    vorrei postarvi l'output del comando dmesg ma non trovo il modo di fare copia e incolla ...

    Beppe '77

    ... l'unica cosa che so è quella di non sapere.

  8. #8
    Utente di HTML.it L'avatar di zaltar
    Registrato dal
    Nov 2001
    Messaggi
    796
    semplice, basta evidenziare il testo con il mouse e premere il tasto centrale (si, anche se è una rotella) nell'apposita area per scrivere la risposta del forum.

  9. #9
    fantastico!!!

    eccovi qui l'output del mio dmesg (spero che qualcuno ci capisca qualcosa perchè per me è arabo)


    bash-3.00$ dmesg
    Linux version 2.4.29 (root@midas) (gcc version 3.3.4) #6 Thu Jan 20 16:30:37 PST 2005
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
    BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
    BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
    BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
    511MB LOWMEM available.
    On node 0 totalpages: 131056
    zone(0): 4096 pages.
    zone(1): 126960 pages.
    zone(2): 0 pages.
    Kernel command line: BOOT_IMAGE=Linux ro root=303
    Initializing CPU#0
    Detected 3081.515 MHz processor.
    Console: colour dummy device 80x25
    Calibrating delay loop... 6147.27 BogoMIPS
    Memory: 515348k/524224k available (1831k kernel code, 8488k reserved, 607k data, 120k init, 0k highmem)
    Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
    Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
    Mount cache hash table entries: 512 (order: 0, 4096 bytes)
    Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
    Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
    CPU: Trace cache: 12K uops, L1 D cache: 8K
    CPU: L2 cache: 512K
    CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
    CPU: Common caps: bfebfbff 00000000 00000000 00000000
    CPU: Intel(R) Pentium(R) 4 CPU 3.06GHz stepping 09
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Checking 'hlt' instruction... OK.
    POSIX conformance testing by UNIFIX
    mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
    mtrr: detected mtrr type: Intel
    PCI: PCI BIOS revision 2.10 entry at 0xfaa10, last bus=1
    PCI: Using configuration type 1
    PCI: Probing PCI hardware
    PCI: Probing PCI hardware (bus 00)
    PCI: Using IRQ router default [1039/0648] at 00:00.0
    Linux NET4.0 for Linux 2.4
    Based upon Swansea University Computer Society NET3.039
    Initializing RT netlink socket
    Starting kswapd
    VFS: Disk quotas vdquot_6.5.1
    Journalled Block Device driver loaded
    vesafb: framebuffer at 0xe0000000, mapped to 0xe080d000, size 1536k
    vesafb: mode is 1024x768x8, linelength=1024, pages=4
    vesafb: protected mode interface info at c000:c460
    vesafb: scrolling: redraw
    Console: switching to colour frame buffer device 128x48
    fb0: VESA VGA frame buffer device
    pty: 512 Unix98 ptys configured
    Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
    ttyS00 at 0x03f8 (irq = 4) is a 16550A
    ttyS01 at 0x02f8 (irq = 3) is a 16550A
    Real Time Clock Driver v1.10f
    Floppy drive(s): fd0 is 1.44M
    FDC 0 is a post-1991 82077
    RAMDISK driver initialized: 16 RAM disks of 7777K size 1024 blocksize
    loop: loaded (max 8 devices)
    Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    SIS5513: IDE controller at PCI slot 00:02.5
    SIS5513: chipset revision 0
    SIS5513: not 100% native mode: will probe irqs later
    SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hdaMA, hdbMA
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdcMA, hddMA
    hda: MAXTOR 6L020J1, ATA DISK drive
    hdb: HL-DT-ST DVDRAM GSA-4163B, ATAPI CD/DVD-ROM drive
    blk: queue c03ad460, I/O limit 4095Mb (mask 0xffffffff)
    hdc: MAXTOR 6L060J3, ATA DISK drive
    hdd: DVD-ROM BDV212B, ATAPI CD/DVD-ROM drive
    blk: queue c03ad8b4, I/O limit 4095Mb (mask 0xffffffff)
    ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    ide1 at 0x170-0x177,0x376 on irq 15
    hda: attached ide-disk driver.
    hda: host protected area => 1
    hda: 40130390 sectors (20547 MB) w/1819KiB Cache, CHS=2498/255/63, UDMA(133)
    hdc: attached ide-disk driver.
    hdc: host protected area => 1
    hdc: setmax LBA 117266688, native 117264575
    hdc: 117264575 sectors (60039 MB) w/1819KiB Cache, CHS=116333/16/63, UDMA(133)
    hdb: attached ide-cdrom driver.
    hdb: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
    Uniform CD-ROM driver Revision: 3.12
    hdd: attached ide-cdrom driver.
    hdd: ATAPI 40X DVD-ROM drive, 512kB Cache, UDMA(33)
    Partition check:
    hda: hda1 hda2 hda3
    hdc: [PTBL] [7299/255/63] hdc1 hdc2 < hdc5 >
    SCSI subsystem driver Revision: 1.00
    kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
    kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
    kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
    md: linear personality registered as nr 1
    md: raid0 personality registered as nr 2
    md: raid1 personality registered as nr 3
    md: raid5 personality registered as nr 4
    raid5: measuring checksumming speed
    8regs : 3645.600 MB/sec
    32regs : 2286.400 MB/sec
    pIII_sse : 3982.800 MB/sec
    pII_mmx : 3634.800 MB/sec
    p5_mmx : 3630.400 MB/sec
    raid5: using function: pIII_sse (3982.800 MB/sec)
    md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
    md: Autodetecting RAID arrays.
    md: autorun ...
    md: ... autorun DONE.
    LVM version 1.0.8(17/11/2003)
    Initializing Cryptographic API
    NET4: Linux TCP/IP 1.0 for NET4.0
    IP Protocols: ICMP, UDP, TCP, IGMP
    IP: routing cache hash table of 4096 buckets, 32Kbytes
    TCP: Hash tables configured (established 32768 bind 65536)
    Linux IP multicast router 0.06 plus PIM-SM
    NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
    FAT: bogus logical sector size 0
    UMSDOS: msdos_read_super failed, mount aborted.
    FAT: bogus logical sector size 0
    FAT: bogus logical sector size 0
    reiserfs: found format "3.6" with standard journal
    reiserfs: checking transaction log (device ide0(3,3)) ...
    for (ide0(3,3))
    reiserfs: replayed 24 transactions in 1 seconds
    ide0(3,3):Using r5 hash to sort names
    VFS: Mounted root (reiserfs filesystem) readonly.
    Freeing unused kernel memory: 120k freed
    Adding Swap: 979956k swap-space (priority -1)
    Linux agpgart interface v0.99 (c) Jeff Hartmann
    agpgart: Maximum main memory to use for agp memory: 439M
    agpgart: Detected SiS 648 chipset
    agpgart: AGP aperture is 64M @ 0xe8000000
    scsi0 : SCSI host adapter emulation for IDE ATAPI devices
    NTFS driver v1.1.22 [Flags: R/O MODULE]
    hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error }
    hdc: dma_intr: error=0x84 { DriveStatusError BadCRC }
    hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error }
    hdc: dma_intr: error=0x84 { DriveStatusError BadCRC }
    hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error }
    hdc: dma_intr: error=0x84 { DriveStatusError BadCRC }
    hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error }
    hdc: dma_intr: error=0x84 { DriveStatusError BadCRC }
    hdd: DMA disabled
    ide1: reset: success
    Linux Kernel Card Services 3.1.22
    options: [pci] [cardbus] [pm]
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Intel ISA PCIC probe: not found.
    Databook TCIC-2 PCMCIA probe: not found.
    ds: no socket drivers loaded!
    8139too Fast Ethernet driver 0.9.26
    eth0: RealTek RTL8139 at 0xe0b02000, 00:0d:61:a6:cc:13, IRQ 11
    eth0: Identified 8139 chip type 'RTL-8101'
    usb.c: registered new driver usbdevfs
    usb.c: registered new driver hub
    ehci_hcd 00:03.3: Silicon Integrated Systems [SiS] USB 2.0 Controller
    ehci_hcd 00:03.3: irq 11, pci mem e0b1a000
    usb.c: new USB bus registered, assigned bus number 1
    PCI: cache line size of 128 is not supported by device 00:03.3
    ehci_hcd 00:03.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
    hub.c: USB hub found
    hub.c: 6 ports detected
    eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
    usb-ohci.c: USB OHCI at membase 0xe0b22000, IRQ 11
    usb-ohci.c: usb-00:03.0, Silicon Integrated Systems [SiS] USB 1.0 Controller
    usb.c: new USB bus registered, assigned bus number 2
    hub.c: USB hub found
    hub.c: 2 ports detected
    usb-ohci.c: USB OHCI at membase 0xe0b24000, IRQ 9
    usb-ohci.c: usb-00:03.1, Silicon Integrated Systems [SiS] USB 1.0 Controller (#2)
    usb.c: new USB bus registered, assigned bus number 3
    hub.c: USB hub found
    hub.c: 2 ports detected
    usb-ohci.c: USB OHCI at membase 0xe0b26000, IRQ 5
    usb-ohci.c: usb-00:03.2, Silicon Integrated Systems [SiS] USB 1.0 Controller (#3)
    usb.c: new USB bus registered, assigned bus number 4
    hub.c: USB hub found
    hub.c: 2 ports detected
    intel8x0_measure_ac97_clock: measured 40307 usecs
    intel8x0: clocking to 48000
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    shpchp: shpc_init : shpc_cap_offset == 0
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    pciehp: PCI Express Hot Plug Controller Driver version: 0.5
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    shpchp: shpc_init : shpc_cap_offset == 0
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    pciehp: PCI Express Hot Plug Controller Driver version: 0.5
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    shpchp: shpc_init : shpc_cap_offset == 0
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    pciehp: PCI Express Hot Plug Controller Driver version: 0.5
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    shpchp: shpc_init : shpc_cap_offset == 0
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    pciehp: PCI Express Hot Plug Controller Driver version: 0.5
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    shpchp: shpc_init : shpc_cap_offset == 0
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    pciehp: PCI Express Hot Plug Controller Driver version: 0.5
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    shpchp: shpc_init : shpc_cap_offset == 0
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    pciehp: PCI Express Hot Plug Controller Driver version: 0.5
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    shpchp: shpc_init : shpc_cap_offset == 0
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    pciehp: PCI Express Hot Plug Controller Driver version: 0.5
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    shpchp: shpc_init : shpc_cap_offset == 0
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    pciehp: PCI Express Hot Plug Controller Driver version: 0.5
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    shpchp: shpc_init : shpc_cap_offset == 0
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    pciehp: PCI Express Hot Plug Controller Driver version: 0.5
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    shpchp: shpc_init : shpc_cap_offset == 0
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    pciehp: PCI Express Hot Plug Controller Driver version: 0.5
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    shpchp: shpc_init : shpc_cap_offset == 0
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    pciehp: PCI Express Hot Plug Controller Driver version: 0.5
    uhci.c: USB Universal Host Controller Interface driver v1.1
    usb-uhci.c: $Revision: 1.275 $ time 19:56:21 Jan 20 2005
    usb-uhci.c: High bandwidth mode enabled
    usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
    parport0: PC-style at 0x378 [PCSPP,TRISTATE]
    parport0: Printer, Hewlett-Packard OfficeJet K60
    lp0: using parport0 (polling).




    sapete aiutarmi x far funzionare l'audio ??

    grazie
    Beppe '77

    ... l'unica cosa che so è quella di non sapere.

  10. #10
    fai un paio di prove

    dai un

    modprobe intel8x0
    poi lancia un

    alsaconf

    lsmod

    incolla qui anche il risultato del comando

    modprobe -l | grep intel

Permessi di invio

  • Non puoi inserire discussioni
  • Non puoi inserire repliche
  • Non puoi inserire allegati
  • Non puoi modificare i tuoi messaggi
  •  
Powered by vBulletin® Version 4.2.1
Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.