Salve a tutti,
come dal titolo ho lanciato lo script speedtouchconf.sh per far funzionare il mio modem ADSL USB Alcatel SpeedTouch Manta.
questo l'output dello script:
- (c) Steve Parker, 17 Oct 2002 - 2005 (http://steve-parker.org)
speedtouchconf comes with ABSOLUTELY NO WARRANTY; for details type:
/usr/bin/connetti -gpl
This is free software, and you are welcome to redistribute it
under certain conditions.
See the included file COPYING for more details.
************************************************
* *
* speedtouchconf.sh by Steve Parker *
* *
* http://speedtouchconf.sourceforge.net/ *
* based on speedtouch.sourceforge.net project *
* *
************************************************
If you have any problems with this script, mail me
(steve at steve-parker dot org) with the files
/tmp/speedtouch.txt and /var/log/messages for diagnosis.
The kernel speedtch module is loaded. This is not
compatible with the speedtouch usermode driver.
Removing the speedtch module
Linux kernel version 2.6 okay.
/usr/bin
*******************************************
* *
* Please select your ISP Settings *
* *
*******************************************
Country/ISP VPI VCI
Belgium, ? 8 35
Denmark, Orang 8 35
France, wanado 8 35
France, ? 8 67
Italy, ? 8 35
Netherlands, ? 8 48
Netherlands 0 35
Poland (NeoStrada) 0 35
UK, Any 0 38
Austria (AON) 8 48
US, BellSouth 8 35
Singapore Pacificnet 0 100
Please type your VPI VCI numbers (eg, 0 38 for UK)
8 35
Please enter your ISP Login ID (eg another@hg1.btinternet.com)
**********@*********
Please enter your ISP Password
**********
Settings:
VPI / VCI : 8 / 35
Login : **********@*********
Password : ******
Are these correct? (Y/N)
y
No further user interaction is required.
Configuring SpeedTouch Driver...
Software Configuration - SUCCESS
Building SpeedTouch Driver...
Software Build - SUCCESS
Installing SpeedTouch Driver...
Software Installation - SUCCESS
Creating ppp files in /etc/ppp
You can ignore any insmod hints here...
*** Configuration finished. Starting the connection ***
ven set 30 15:30:36 UTC 2005
The modem lights should start flashing for approx. 60 seconds...
You might see some messages about USBDEVFS_BULK failed - you can ignore this.
ven set 30 15:31:11 UTC 2005
The lights should both be solid green now.
Running : /usr/sbin/pppd call adsl
Called pppd - you should see some messages about IP addresses now...
Sep 30 15:31:22 FuncrusherMachinE pppd[7683]: pppd 2.4.3 started by root, uid 0
Sep 30 15:31:22 FuncrusherMachinE pppd[7683]: Using interface ppp0
Sep 30 15:31:22 FuncrusherMachinE pppd[7683]: Connect: ppp0 <--> /dev/pts/2
Sep 30 15:31:23 FuncrusherMachinE pppd[7683]: PAP authentication succeeded
Sep 30 15:31:23 FuncrusherMachinE pppd[7683]: local IP address 151.37.88.13
Sep 30 15:31:23 FuncrusherMachinE pppd[7683]: remote IP address 151.6.155.65
Sep 30 15:31:23 FuncrusherMachinE pppd[7683]: primary DNS address 193.70.152.15
Sep 30 15:31:23 FuncrusherMachinE pppd[7683]: secondary DNS address 193.70.152.25
inet addr:151.37.88.13 P-t-P:151.6.155.65 Mask:255.255.255.255
Looks like we're online...
Hey look, I can see the Net from here!
Configuration finished.
Any potential problems are listed below:
To automatically dial-in when the PC boots up :
update-rc.d speedtouch start 90 2 3 4 5 . stop 10 0 1 6 .
Do you want to set this up now? (Yes / No)
No
You are now connected. There is no need to run this
speedtouchconf.sh script again.
Congratulations.
fin quì tutto bene, infatti sono collegato a internet.
Il problema sorge dopo il riavvio: seguendo l'indicazione dello script "There is no need to run this
speedtouchconf.sh script again" non lo lancio ma noto ke mi ha installato degli eseguibili:
speedtouch-setup
speedtouch-start
speedtouch-stop
lancio speedtouch-setup configuro tutto indicandogli il file del firmware scaricato dal sito dell'alcatel e tutto il resto di cui aveva bisogno.
Lancio anche speedtouch-start e questo è l'output ke ricevo:
- root@FuncrusherMachinE:/home/funcrusher# speedtouch-start
Starting ADSL connection...
Loading OHCI support... KO
senza connettermi.
Perchè mi da questo problema se quando lancio lo script x l'installazione fila tutto liscio?
Grazie!
Funcrusher