installazione connection card su linux

[MikeloSat]

possiedo un Vodaf*ne Qualcom 3GDatacard Umts sul mio portatile che dovrei installare e configurare su linux,desidererei capire da dove si inizia e se qlc ha installato mai il mio stesso tipo di card.....grazie.

[MikeloSat]

[MikeloSat]

perchè non ricevo risposte?

[MikeloSat]

:master:

[MikeloSat]

ho trovato finalmente un'articolo con tutta la procedura d'installazione della 3G Datacard Qualcom di Vodaf*ne:

/etc/ppp/peers/vodafone:


###########################################
#Suggested Vodafone PPPD configuration file
#File /etc/ppp/peers/vodafone
###########################################
#Set this to the device allocated to the Datacard
/dev/modem
#Baudrate
384000
#Idle time for closing connection
idle 7200
#Lock the device for this PPPD process use only
lock
#Use normal handshaking
crtscts
#Assume it is a modem device and force modem control methods
modem
#Any user can start the connection
noauth
#If a default route exists replace it with the ppp link
#You get an error if this command is not supported
#by your version of PPPD
replacedefaultroute
#Make the ppp link the default root
defaultroute
#Username and Password for computer/GlobeTrotter ppp link
#Normally ignored. Change if GSM Operator requires it
user Anyname
password Anypassword
#Change the path to chat if required for your version of Linux
connect "/usr/sbin/chat -V -f /etc/ppp/vodafone-chat"
#Accept IP address provided by network
noipdefault
#Detach PPPD from console used to run the program {optional}
#updetach
#Get DNS addresses from operator
usepeerdns
#Don't use VJ compression for ppp link
novj
###########################################
###########################################


/etc/ppp/vodafone-chat
Note: A good explanation of ETSI AT commands may be useful.

###########################################
# Suggested chat script called by PPPD
# File: /etc/ppp/vodafone-chat
# Heavily edited by David Cottingham
# Many of these commands you will not need: they are for illustration
# Comment them out as necessary.
# david [=at=] cottinghams.com 21/06/2005
# See http://www.pharscape.org/index.php?opti ... &id=29
###########################################
ABORT BUSY
ABORT 'NO CARRIER'
ABORT ERROR
REPORT CONNECT
TIMEOUT 120
"" "AT&F"
OK "ATE1"
# Is there a PIN set on the SIM?
#OK "AT+CPIN?"
# What network are we connected to?
OK "AT+COPS?"
# Next line can be used to get a full list of available
# networks, but it takes a long time!
#OK "AT+COPS=?"
# List what AT commands we can issue to this card.
#OK "AT&V"
# Prefer UMTS networks over GPRS networks
# (but connect to GPRS if UMTS unavailable)
OK "AT_OPSYS=3"
# Current network signal strength
OK "AT+CSQ"
# Note the single quotes at the beginning and end,
# reversing the quoting (double at ends, single
# inside) does NOT work!
OK 'AT+CGDCONT=1,"IP","internet"'
SAY "Calling Vodafone GPRSn"
TIMEOUT 60
OK "ATD*99***1#"
CONNECT c
###########################################
###########################################

QUI ci sta tutto il doc con la spiegazione in inglese ma io non conoscendo bene linux ankora non ci capisco nulla,chiedo a qlc che ha un po +di dimestichezza se è così gentile d'aiutarmi?grazie.