ho una linux box con due interfaccie di rete:
codice:
eth0 Link encap:Ethernet HWaddr 00:10:A7:19:64:89
inet addr:192.168.0.1 Bcast:192.168.0.255 Mask:255.255.255.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:51 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:8259 (8.0 KiB)
Interrupt:11 Base address:0x9400
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:26 errors:0 dropped:0 overruns:0 frame:0
TX packets:26 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:2184 (2.1 KiB) TX bytes:2184 (2.1 KiB)
wlan0 Link encap:Ethernet HWaddr 00:11:2F:50:A5:F1
inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2716 errors:0 dropped:0 overruns:0 frame:0
TX packets:1949 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:242112 (236.4 KiB) TX bytes:505113 (493.2 KiB)
Interrupt:9 Memory:d4000000-d400ffff
e fowarding attivato
codice:
echo "1" > /proc/sys/net/ipv4/ip_forward
un cliente win con ip 192.168.1.2 (gw 192.168.1.1) che naviga regolarmente attraverso il moden della linux box (interfaccia ppp0)
Il mio problema e questo: perche' non riesco a pingare l'interfaccia 192.168.0.1 della linux box?
ho anche provato ad aggiungere
codice:
route add -net 192.168.0.0 netmask 255.255.255.0 dev eth0
ma nulla...
Inoltre e' normale che se lancio il comando route non mi viene visualizzato l'instradamento creato con
codice:
route add -net 192.168.0.0 netmask 255.255.255.0 dev eth0
Grazie e buon anno a tutti