Ciau
ho appena installato Fedora core e eciadsl per navigare..
Ho dovuto patchare il kernel poiché dalla 2.6 ha eciadsl ha dei problemi con l'usb (o il kernel ha dei problemi con eciadsl!). Fin quì tutto ok, poi ho installato eciadsl dai sorgenti, configurato con make cfg e provato a connettermi con startmodem.. ma ecco il risultato:
__________________________________________________ __________________
[root@localhost eciadsl]# startmodem
setting up USB support (1/5)..
loading firmware (2/5)..
GlobeSpan USB ADSL WAN Modem compatible modem found (in 2460ms)
ECI load 1: success
firmware loaded successfully
setting up modem (3/5)..
ECI load 2: success
synchronization successful
connecting modem (4/5)..
using channel 10
Using interface ppp0
Connect: ppp0 <--> /dev/pts/20
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x71631059>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x71631059>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x71631059>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x71631059>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x71631059>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x71631059>]
Script /usr/local/bin/pppoeci -alt 4 -vpi 8 -vci 35 -vendor 0x0915 -product 0x00ca -mode VCM_RFC2364 finished (pid 7695), status = 0x0
Modem hangup
Connection terminated.
using channel 11
Using interface ppp0
Connect: ppp0 <--> /dev/pts/21
sent [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0x6378bfba>]
sent [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0x6378bfba>]
sent [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0x6378bfba>]
sent [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0x6378bfba>]
Script /usr/local/bin/pppoeci -alt 4 -vpi 8 -vci 35 -vendor 0x0915 -product 0x00ca -mode VCM_RFC2364 finished (pid 7707), status = 0x0
Modem hangup
Connection terminated.
using channel 12
Using interface ppp0
Connect: ppp0 <--> /dev/pts/22
sent [LCP ConfReq id=0x3 <asyncmap 0x0> <magic 0x2a18da5a>]
sent [LCP ConfReq id=0x3 <asyncmap 0x0> <magic 0x2a18da5a>]
sent [LCP ConfReq id=0x3 <asyncmap 0x0> <magic 0x2a18da5a>]
sent [LCP ConfReq id=0x3 <asyncmap 0x0> <magic 0x2a18da5a>]
Script /usr/local/bin/pppoeci -alt 4 -vpi 8 -vci 35 -vendor 0x0915 -product 0x00ca -mode VCM_RFC2364 finished (pid 7734), status = 0x0
Modem hangup
Connection terminated.
using channel 13
Using interface ppp0
Connect: ppp0 <--> /dev/pts/23
sent [LCP ConfReq id=0x4 <asyncmap 0x0> <magic 0x8f1a2c83>]
sent [LCP ConfReq id=0x4 <asyncmap 0x0> <magic 0x8f1a2c83>]
sent [LCP ConfReq id=0x4 <asyncmap 0x0> <magic 0x8f1a2c83>]
sent [LCP ConfReq id=0x4 <asyncmap 0x0> <magic 0x8f1a2c83>]
Script /usr/local/bin/pppoeci -alt 4 -vpi 8 -vci 35 -vendor 0x0915 -product 0x00ca -mode VCM_RFC2364 finished (pid 7747), status = 0x0
Modem hangup
Connection terminated.
using channel 14
Using interface ppp0
Connect: ppp0 <--> /dev/pts/24
sent [LCP ConfReq id=0x5 <asyncmap 0x0> <magic 0x59ca11ee>]
sent [LCP ConfReq id=0x5 <asyncmap 0x0> <magic 0x59ca11ee>]
sent [LCP ConfReq id=0x5 <asyncmap 0x0> <magic 0x59ca11ee>]
sent [LCP ConfReq id=0x5 <asyncmap 0x0> <magic 0x59ca11ee>]
Script /usr/local/bin/pppoeci -alt 4 -vpi 8 -vci 35 -vendor 0x0915 -product 0x00ca -mode VCM_RFC2364 finished (pid 7767), status = 0x0
Modem hangup
Connection terminated.
using channel 15
Using interface ppp0
Connect: ppp0 <--> /dev/pts/25
sent [LCP ConfReq id=0x6 <asyncmap 0x0> <magic 0xeed13aae>]
sent [LCP ConfReq id=0x6 <asyncmap 0x0> <magic 0xeed13aae>]
sent [LCP ConfReq id=0x6 <asyncmap 0x0> <magic 0xeed13aae>]
sent [LCP ConfReq id=0x6 <asyncmap 0x0> <magic 0xeed13aae>]
Script /usr/local/bin/pppoeci -alt 4 -vpi 8 -vci 35 -vendor 0x0915 -product 0x00ca -mode VCM_RFC2364 finished (pid 7788), status = 0x0
Modem hangup
Connection terminated.
using channel 16
Using interface ppp0
Connect: ppp0 <--> /dev/pts/26
sent [LCP ConfReq id=0x7 <asyncmap 0x0> <magic 0x271cec68>]
sent [LCP ConfReq id=0x7 <asyncmap 0x0> <magic 0x271cec68>]
sent [LCP ConfReq id=0x7 <asyncmap 0x0> <magic 0x271cec68>]
sent [LCP ConfReq id=0x7 <asyncmap 0x0> <magic 0x271cec68>]
Script /usr/local/bin/pppoeci -alt 4 -vpi 8 -vci 35 -vendor 0x0915 -product 0x00ca -mode VCM_RFC2364 finished (pid 7807), status = 0x0
Modem hangup
Connection terminated.
using channel 17
Using interface ppp0
Connect: ppp0 <--> /dev/pts/27
sent [LCP ConfReq id=0x8 <asyncmap 0x0> <magic 0x3633a9ce>]
sent [LCP ConfReq id=0x8 <asyncmap 0x0> <magic 0x3633a9ce>]
sent [LCP ConfReq id=0x8 <asyncmap 0x0> <magic 0x3633a9ce>]
sent [LCP ConfReq id=0x8 <asyncmap 0x0> <magic 0x3633a9ce>]
Script /usr/local/bin/pppoeci -alt 4 -vpi 8 -vci 35 -vendor 0x0915 -product 0x00ca -mode VCM_RFC2364 finished (pid 7827), status = 0x0
Modem hangup
Connection terminated.
using channel 18
Using interface ppp0
Connect: ppp0 <--> /dev/pts/28
Terminating on signal 2.
Child process /usr/local/bin/pppoeci -alt 4 -vpi 8 -vci 35 -vendor 0x0915 -product 0x00ca -mode VCM_RFC2364 (pid 7852) terminated with signal 2
Modem hangup
Connection terminated.
failed to connect
[root@localhost eciadsl]#
__________________________________________________ ___
non so se è perché ho sbagliato a scegliere dal menu ppp, non so se bisogna usare dhcp ma sopratutto.. non so xché fa sto errore!! Uhm aiutini? :tongue: in caso serva ecco il mio file di configurazione:
VID1=08ea
PID1=00c9
VID2=0915
PID2=00ca
MODE=VCM_RFC2364
VCI=35
VPI=8
FIRMWARE=/etc/eciadsl/firmware00.bin
SYNCH=/etc/eciadsl/synch01.bin
PPPD_USER=emmososcemo
PPPD_PASSWD=dapostarloqui
USE_DHCP=no
USE_STATICIP=no
STATICIP=
GATEWAY=
MODEM=Ericsson hm120dp
PROVIDER=IT..Telecom Italia
DNS1=212.216.112.112
DNS2=212.216.172.62
P.S.
utilizzo alice
Rispondi quotando
